The Evolution EVC2, EVR2 and EVR2+ differ only in their capacity and the assisted balancing on the larger EVRs. The control system and general functions are identical.

​

The EVC2 is our medium floor-standing 3D casting machine, designed for mid-sized moulds or multiple smaller ones. The EVRs are perfect for larger moulds or clusters of smaller ones. All three run off a standard 13amp plug (domestic type) - no three-phase supply is needed.

 

If you think you may be on the border between the sizes, it's worth bearing in mind that a large machine will run a small mould, but a smaller machine might not run your bigger moulds.

​

Our rotacasters been designed with function and comfort in mind. Even fully loaded and working at top speed, these machines are quiet and unobtrusive.

​

One of the many facets of Evolution rotacasting machines that make them unusual is their smoothness. These rotacasters are not only integrally balanced, you can balance them still further once you load your mould.

 

Why is this a benefit? Balanced moulds run without  sloshing or splashing the resin. This means less air bubbles and a more even wall thickness, which in turn means better material economy. It also results in a machine running under less stress, giving you a quieter environment and a rotacaster with a longer effective working life.

​

We're so confident about how smoothly our single-post rotacasters run that we don't bolt them to the floor. The EVC2, EVR2 and EVR2+ are all mounted on omni-directional castor wheels. Unlock the wheels and move your helpful rotational casting machine to just where you want to work. At the end of the day, or when you need more space, just roll her back out of the way.

​

If you need to run really big, heavy moulds, then the twin post EVRX is the machine for you. This is a serious beast of a rotacaster, built entirely to your specifications. The EVRX comes is a variety of safety surrounds to suit your individual requirements. The EVRX rotacaster runs off a 16amp power socket (not three-phase). No two EVRX are the same, so if this is your route, give us a call on the  number below to discuss your requirements.

​

Getting your mould finely balanced on an Evolution rotacaster is simple. The heavier EVR2 and EVR2+ are fitted with an assisted adjustment system, and the EVRX with motorised adjustment, to enable you to move the independent counterweight and turntable to exactly where you need them with a minimum of effort. Balanced moulds give better casts, after all.

​

The EVR2 and EVR2+ come with separate top support arms to enable the secure attachment of longer moulds. Top support arms are also available for the EVC2. The EVRX (built to client specifications) features a built-in top support for those really large, heavy moulds.